Mast climbing equipment and transport platforms
Mast Climbers
HEK MSM Super
A highly-flexible work platform ideal for elevations up to 660 feet and can be used with single or double masts. Platform width is 5 feet and the length can be set up to 106 feet with a maximum payload of 8,800 pounds.
HEK MSHF
Similar to the MSM Super, and can also free-stand without anchoring up to 66 feet high outside, and 99 feet high inside.
HEK MS 5000
A freestanding chassis-mounted work platform ideal for masonry, brick laying, cladding, glazing, renovation or demolition with its lower deck. Platform dimensions are 5 feet wide to 59 feet long with a maximum payload capacity of 12,000 pounds.
HEK ProMax
A work platform with a gearbox providing a 57% increase in travel speed to 36 ft per minute. Load capacity in single-mast configuration is 6,400 pounds, and 8,800 pounds in twin-mast configuration. Approved for use in NYC.
safi jolly jr.
At only 2-1/2 feet wide, the Safi Jr. mast climbing system is ideal for alleys where the distance from the façade is limited. Additional, the lightweight characteristic of this system makes it easy to set on rooftops. This system has a maximum length of 58 feet and a maximum payload capacity of 1,760 pounds.
Transport Platforms
HEK GTP 1500
A twin mast machine with a large-sized platform, oriented parallel to the facade. Maximum payload is 3,300 pounds (including seven people) up to heights of 394 feet. Platform dimensions are 5 feet by 13 feet.
HEK GTP-T-1500
A twin mast machine with a large-sized platform, oriented perpendicular to the facade. Maximum payload is 3,300 pounds (including seven people) up to heights of 394 feet. Platform dimensions are 4’-7” by 10’-3”.
HEK GTP 500
A single mast machine ideal for when space is limited. Maximum payload is 1,500 pounds (including 3 people) up to heights of 394 feet. Platform dimensions are 4’-1” by 5’-3”.